M6si - 220wpc Intergrated Amplifier
The M6si offers excellent performance, facilities and power.
Internally, the M6si is configured as 2 independent monobloc power amps with a separate pre amp. It is, in fact, a pre amp with 2 monobloc power amps that just happen to share the same casework.
The M6si has 220wpc. It has very low distortion, outstanding noise ratio and extremely flat frequency response. Its inputs are phono (MM/MC), 4 line level, 1 balanced XLR and 1 USB ‘B’ up to 24bit 96kHz asynchronous.
The M6 combination of high power, high current and extraordinary stability means that it can drive any loudspeaker with ease.
In use it is hard to hear any practical difference between the M6si and other much more expensive amplifiers. In proper blind listening comparisons, the M6si performs incredibly well.
M6si In Brief
M6si - Specifications
Power output: 220 Watts per channel into 8 Ohms
THD (+ noise): <0.007 % typical 20Hz - 20 kHz
Signal to Noise Ratio: >107dB ‘A’ - weighted
Frequency Response: +0, –0.1dB, 10Hz to 20 kHz
4x Line Level RCA
1x Line Level XLR Balanced
1x USB type ‘B’ connector - asynchronous data stream at up to 24-bit/96kHz
1 x switchable phono input
Sensitivity: 3mV nominal (MM), 0.4mV nominal (MC)
Signal / noise ratio: >84dB ‘A’-weighted
Input impedance: 47k Ohms (MM and MC)
Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHz
Dimensions - WxHxD (mm): 440 x 125 x 400
Weight (unpacked / packed): 16.6 kg/ 21.3 kg
Skip navigation Home page Site Map Contact us Top of the page Accessibility Statement Products Latest News About Us Help