High Quality Audio Equipment

Origin Live - Alliance Tonearm Mk4

  • £340.00
  • Product Code: Origin Live - Alliance Tonearm Mk4

Description

Although the Alliance is an entry-level budget tonearm, its performance is higher than most tonearms up to £1000. The Alliance’s incredible performance comes from a high-quality arm tube, costly materials, and a design that derives from the years of award-winning experience.

Features

Single Piece Arm Tube: Made from high-grade aircraft alloy. Stiffness is critical to provide a stable platform to hold your cartridge steady and reduce movement caused by resonance. The results are better dynamics and tight bass performance.

Low Friction Bearings: The bearings governing vertical movement are innovative and cost-effective, similar to knife-edge design. Low friction increases clarity and fluidity in the music.

Integral VTA Adjuster: Consisting of a threaded top nut above arm-board and clamping nut underneath arm-board.

Falling Weight Side Bias: Tests show this to be the highest performing method of achieving side bias. It has lower friction, better constant force and lower resonance than other alternatives such as magnets, springs, levers and twisted threads.

Internal Wiring

is high-grade copper Litz wire, Cryogenically frozen to reduce discontinuities in the conductors. This allows great transparency, detail and freedom from artefacts.

Internal Wiring: Is high-grade copper Litz wire, Cryogenically frozen to reduce discontinuities in the conductors. This allows great transparency, detail and freedom from artefacts.

External Cable: Is an integral well specified but low cost 1 Meter cable with nickel-plated RCA plugs to fit directly into your phono-stage or amplifier.

Basic price is for a 9.5 inch (239mm) Tonearm (Default Standard Length)

The following extras are available on request

9 inch (229mm) Tonearm with Linn Mount (& Geometry) - Does Not Fit Origin Live Decks + £590

External Tonearm Upgrade Cable Hard Wired Into Base of Tonearm + £85

5 Din Pin Straight Connection for External Tonearm Cable (5 Din Pin Male in base of arm and 5 Din Pin Female in external cable) + £110.50

5 Din Pin Right-Angle Connection for External Tonearm Cable (5 Din Pin Male in base of arm and 5 Din Pin Female in external cable) If you have an Linn LP12 or similar turntable we highly recommend ordering your arm with the right angle 5 Din Pin option + £110.50

XLR Termination - both channels + £40.00

Note: These are special order please check lead time before placing your order.

Skip navigation Home page Site Map Contact us Top of the page Accessibility Statement Products Latest News About Us Help