Ultimatum XL10

The ULTIMATUM series of high-performance loudspeakers was conceived by Neat founder, Bob Surgeoner, in 1993 and launched in 1999 with the introduction of the Ultimatum MF9.

The XL10 is the result of a complete revision of the MF9, building upon its considerable strengths in order to deliver a world-class full range performance for the 21st century.

The enclosure comprises eight discrete internal cavities, each optimised for purpose and each different. The bass/midrange volumes are larger to suit the tuning whilst the main HF cavity is small to increase rigidity and resist back pressure from the main drive units. The two EMIT super tweeters are similarly isolated.

The main structure is damped 18mm Birch Plywood sourced from slow-growing forests as this ensures the densest, most consistent material. The drive unitbaffle sections are constructed from a 45mm thick ‘sandwich’ of Birch Plywood, Polyethylene and MDF. This provides a rigid non-resonant platform which allows the drive units to operate with minimal colouration.

All of these features are woven together in the traditional Neat fashion: hundreds of hours of listening tests, empirical experimentation and years of expertise guarantee that the end result is a classic loudspeaker with qualities that few can equal.

SPECIFICATIONS

HF Unit: 26mm SONOMEX Domed XL

Super HF Units: 2* EMIT 25mm planar/ribbon

Bass / Midrange: 2* 168mm NEAT Unit with Aluminium Phase Plug

Bass 4 * 168mm NEAT Unit

Dimensions (hwd): 1500x22x37cm

Plinth (wd): 35 x 51cm

Enclosure type: Multi-chamber, multi-driver array, incorporating isobaric internal cavity, plus upward firing super-tweeters

Sensitivity: 88db/1 watt

Recommended amplifier power: 25 – 500 watts

Impedance: 6 ohms average/Minimum 4 ohms

Weight: 65Kg each

Shipping weight: 150Kg pair

Usually in stock at suppliers warehouse typically we ship in 7 - 10 days.

The representations above are for guidance only.

Exact matching cannot be guaranteed.

Specification may be subject to change without notice.