High Quality Audio Equipment

Ortofon TA-210

  • £1250.00
  • Product Code: ORT_TA210

Ortofon HiFi TA-210 Tonearm

The new Ortofon TA-210 tonearm has gone to the next level of reducing unwanted vibrations in the tonearm by adding more damping material in more places when compared to it's younger sibling, the TA-110. Ortofon's extensive knowledge of vibration properties and characteristics in different shapes and materials has been applied for optimization of the TA-210 tonearm

The TA-210 is given a precision machined slit in each end of the aluminum tube. A piece of Ortofon special vibration damping compound is integrated into each slit. The bottom slit has rubber inserts with high vibration damping properties, and the other top-facing slit has a special proprietary TPE compound with excellent damping properties. Due to the use of these two different materials, an extended damping effect is obtained in the largest possible range. Both inserts integrated in the tonearm tube are manufactured at the Ortofon technical facilities in Nakskov, Denmark.



  • Supplied with LH-2000E headshell and 6NX-TSW-1010 tonearm cables
  • TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings
  • TA-210 has a standard 5-pin DIN connector for tonearm cable
  • The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
  • NEW - Counterweight with Inner/outer scale
  • Inner scale to be applied with main counterweight
  • Outer scale to be applied when extra mass ring is added
  • Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
  • TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
  • NEW - Extra mass ring for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
  • Extra mass ring weight 45g


Technical Data:

Effective mass without headshell - 5 g

Effective armlength (distance between the stylus and pivot point) - 329.0 mm

Mounting distance (distance between the pivot point and turntable center) - 316.6 mm

Offset angle - 16.5 degrees

Overhang - 12.4 mm

Tracking force adjusting range (direct reading) - 0-3/0-4 g

Height adjustment range - 35-55 mm

Diameter of the armbase mounting hole - 19-20 mm

Diameter of the center shaft of tonearm - 18.0 mm

Inner null point - 66 mm

Outer null point - 120.9 mm

Counterweight for cartridge + headshell mass between 21 and 28g - Included

Headshell LH-2000E - Included

Headshell weight - 15.5 g

TA-210 total weight including headshell - 536 g

Set of tonearm cables 6NX-TSW-1010 - Included

Extra mass ring for heavier cartridges - Included

Extra mass ring weight - 45 g

up to 12 months interest free credit

Skip navigation Home page Site Map Contact us Top of the page Accessibility Statement Products Latest News About Us Help