M2 Integrated Amplifier (Black)
The Roksan M2 Integrated Amplifier advances the performance of its class of amplifier to a new level. The ease with which the M2 negotiates the loudspeaker load through even the most delicate yet demanding musical passages is almost unbelievable from such an elegant, pure looking amplifier. Its control and authority appears to be backed by a state of the art power house.
Winner of the 2013 award for' Best Stereo Amp' above £1,500...
Resolution of detail is so harmonic and full of emotion that is reminiscent of our world acclaimed Roksan L1.5 reference preamplifier. Of course pedigree has played an important role but the relentless refinements, tests and never ending demands are what made this project come to life and result in such success.
5 stars and a group test win for the phenomenal M2...
We are proud to present the M2 Integrated Amplifier alongside the M2 CD Player; together these two are perhaps the most iconoclastic electronic components from Roksan yet.
Winner of the 2012 award for' Best Stereo Amp' above £1,500...
The M2 Integrated Amplifier is now available in a limited 'Black Edition'. The pots have been changed to an attractive black finish, and the red LEDs to blue - further adding to the elegance and beauty of this fantastic sounding amplifier.
The M2 Integrated amplifier’s independent power supplies combined with fully symmetrical complimentary circuit design ensure the amplifier uncovers even the most delicate detail and presents it majestically.
|Inputs:||5 Line & Tape, RCA Gold-Plated|
|RCA Gold-Plated (CD Input Switchable to Gold-Plated XLR)|
|Input Impedance:||47 kΩ|
|Input Sensitivity (85W):
||Gold Plated RCA Tape|
|Gold Plated RCA Preamplifier|
|Output Voltage:||240mV (Tape Out)|
|700mV (Pre Out)|
|Power Outputs:||Loudspeaker, L & R|
|Output Power:||85 Watts Into 8Ω, Both Channels Driven|
|125 Watts Into 4Ω, Both Channels Driven|
|Power Supply:||350VA Ultra Low Noise Toroidal Transformer,|
|60VA Ultra Low Noise Transformer|
|Preamp Section Toroidal,|
|5 Regulated Supply Rails|
|Current Output:||Current Output: 60 Amps Peak to Peak|
||-3dB, <1Hz – 90kHz|
|Gain:||40dB Overall (Pre & Power)|
|30.7dB Power Amplifier|
|Harmonic Distortion:||0.002% 1kHz, 0.015% 20kHz 10W - 8Ω|
|0.0025% 1kHz, 0.03% 20kHz 50W - 8Ω|
|Signal-to-Noise:||Line 108dBa (ref. 500mV) 85dBa (ref. 1W, 8Ω)|
|Power Source:||220V – 240V 50Hz / 60Hz|
|(via Mains Inlet Filter)|
|Power Usage:||<230 W|
|Dimensions:||432 x 330 x 70mm (W x D x H)|
|432 x 330 x 80mm (Incl. Feet)|
Usually ships in 2-3 working days
Skip navigation Home page Site Map Contact us Top of the page Accessibility Statement Products Latest News About Us Help