High Quality Audio Equipment

AT-33EV Stereo Moving Coil

  • £399.00
  • Product Code: AT-33EV Stereo Moving Coil

Features

The original model of this stereo cartridge is the AT33ANV, which was available as a special release to celebrate our 45th anniversary. The A33ANV was the first in the AN33 series to feature a Duralumin cantilever, which received wide acclaim for its sound quality. Retaining the basic specification, we present a further improved and evolved model.

The A33EV is a ½ inch, standard mount 0.3 x 0.7 mil elliptical cartridge featuring a tapered Duralumin cantilever which reduces the effective mass of the cartridge, resulting in a more durable cantilever. The Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with a neodymium magnet enhances magnetic energy and PCOCC wire for pure audio transmission.

 

  • Elliptical stylus chip and durable duralumin tapered pipe cantilever
  • 10O mid impedance specifications
  • Dramatically increased magnetism with neodymium magnets and PCOCC as the coil
  • High separation, wide-response dual moving coil
  • VC Mold eliminates unnecessary vibrations
  • "Hanenite" anti-vibration rubber eliminates unwanted vibrations

 

Specs

Type: Dual Moving Coil

Mounting: 1/2" Centers

Frequency Response: 15 - 50,000Hz

Body Material: Aluminium/Synthetic Resin

Channel Separation: 30dB (1kHz)

Output Channel Balance: 0.5dB (1kHz)

Output Voltage: 0.3mV (1kHz and 3.54cm/sec.)

Vertical Tracking Angle: 23°

Vertical Tracking Force Range: 1.8 - 2.2g (2.0g standard)

Stylus Shape: Elliptical Stylus

Curvature Radius: 0.3 x 0.7 mil

Stylus ConstructionNude Square Shank

Cantilever: Duralumin

Coil Impedance: 10Ω (1kHz)

Coil Inductance: 22µH (1kHz)

DC Resistance: 10Ω

Static Compliance: 40×10-6cm/dyne

Dynamic Compliance: 10×10-6cm/dyne (100Hz)

Terminal: Pins Brass

Recommended Load Impedance: More than 100Ω (when head amp connected)

Weight: 6.9g

Dimensions: H16×W16.6×D26.5mm

Replacement Stylus: When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.

Accessories Included: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1

up to 12 months interest free credit

Skip navigation Home page Site Map Contact us Top of the page Accessibility Statement Products Latest News About Us Help