High Quality Audio Equipment


  • £399.00
  • Product Code: AT-OC9ML/ II


The AT-OC9ML/II Dual Moving MicroCoil™ cartridge is a significant achievement in precision manufacturing, with tolerances held to mere thousandths of an inch. Stringent quality control assures that these tolerances, as well as performance criteria, are maintained by every AT-OC9ML/II cartridge. In addition, the AT-OC9ML/II features:


  • Dual-coil system for maximum channel separation.
  • High-flux samarium cobalt magnet for improved electrical generation.
  • PCOCC coil windings for low-loss “transparent” signal transmission.
  • Gold-plated solid boron cantilever.
  • MicroLine™ stylus


Type: Dual Moving Coil

Mounting: 1/2” centers

Frequency Response: 15 - 50,000Hz

Body Material: Aluminium

Channel Separation: 31dB (1kHz)

Output Channel Balance: 1.0dB (1kHz)

Output Voltage: 0.4mV (1kHz and 5cm/sec.)

Vertical Tracking Angle: 23°

Vertical Tracking Force Range: 1.25 - 1.75g (1.5g standard)

Stylus Shape: MicroLine™

Stylus Curvature Radius: MicroLinear™

Stylus Construction: Nude Square Shank

Cantilever: Gold-plated solid boron

Coil Impedance: 12Ω (1kHz)

Coil Inductance: 25µH (1kHz)

DC Resistance: 12Ω

Static Compliance: 35×10-6cm/dyne

Dynamic Compliance: 9×10-6cm/dyne (100Hz)

Recommended Load Impedance: Min 100Ω

Weight: 8.0g

Dimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm

Replacement Stylus: When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.

Accessories Included: 1 non magnetic screw driver; 1 brush; 2 washers; 2 x 13.5 mm mounting screws; 2 x 18 mm mounting screws; 1 plastic protector;

up to 12 months interest free credit

Skip navigation Home page Site Map Contact us Top of the page Accessibility Statement Products Latest News About Us Help